Starlink Mini Magnetic Flat Mount with Protective Cover - 264 lb

1. HERO SECTION

MAGNETIC FLAT MOUNT KIT FOR STARLINK MINI

A Stronger No-Drill Mount for Compatible Metal Surfaces

Mount your Starlink Mini on suitable flat metal surfaces without drilling permanent holes. This magnetic mounting kit combines a magnetic base with a protective PC cover plate to create a cleaner, more organized mounting setup for parked RVs, vans, pickups, and temporary work locations.

Designed for flexible placement when permanent mounting hardware is not practical.

Key Features

• Up to 264 lb Rated Vertical Pull

• Protective PC Cover Plate Included

• No Drilling Required

• Designed for Starlink Mini

Check Compatibility →

2. STRONG MAGNETIC HOLD

Powerful Magnetic Attachment for Suitable Steel Surfaces

The magnetic base is designed to hold firmly against compatible flat ferromagnetic metal surfaces when properly installed.

With a stated maximum vertical pull rating of 264 lb under specified test conditions, the mount offers a strong magnetic attachment for temporary Starlink Mini placement.

• Strong Magnetic Base: Designed for suitable flat steel surfaces.

• Flat Contact Design: Full contact helps maximize magnetic holding force.

• Flexible Placement: Move your Starlink Mini setup between compatible locations when needed.

Important: The 264 lb rating is not a guarantee of safe holding under every condition. Actual holding strength depends on the surface material, coating, flatness, cleanliness, vibration, moisture, and installation conditions.

3. PROTECTIVE PC COVER PLATE

A Cleaner Mounting Interface for Starlink Mini

The included PC cover plate helps create a more complete flat-mount assembly and provides an additional protective layer for the Starlink Mini mounting setup.

• Helps create a cleaner, more finished appearance.

• Designed to work with the magnetic mounting base.

• Supports a more organized mounting arrangement.

• Suitable for temporary installations where drilling is undesirable.

The protective cover plate is not a substitute for confirming the mount's compatibility with your device and installation surface.

4. NO-DRILL INSTALLATION

Get a Stable Position Without Permanent Hardware

This magnetic flat mount is useful when you need a removable Starlink Mini setup for travel, camping, fieldwork, or temporary internet access.

Step 1 — Test the Surface

Confirm that the surface is magnetic, flat, clean, and suitable for the mount.

Step 2 — Position the Mount

Place the magnetic base flat against the surface. Ensure that the entire magnetic contact area sits flush.

Step 3 — Check the Hold

Test the mount by hand before installing your Starlink Mini. Do not use the mount if it shifts, rocks, or fails to hold securely.

Step 4 — Manage the Cable

Leave enough cable slack and route it so that doors, wheels, wind, or accidental pulling cannot loosen the setup.

5. COMPATIBILITY CHECK

Use Only Where the Magnetic Base Can Fully Contact Steel

For best results, install the mount on a clean, dry, flat ferromagnetic metal surface.

Recommended Surfaces

• Suitable flat steel panels

• Compatible steel equipment boxes

• Suitable flat steel racks or frames

Not Suitable

• Aluminum

• Fiberglass

• Glass

• Plastic

• Carbon fiber

• Rubber or fabric

• Curved, heavily textured, or uneven surfaces

• Surfaces that do not strongly attract the magnetic base

Paint, coatings, dirt, and surface irregularities can reduce magnetic contact and holding strength.

Before Every Installation

Clean and dry the surface, place the mount flat, and test the holding force manually. Recheck the mount after changes in weather, temperature, or surface conditions.

6. BUILT FOR TEMPORARY MOUNTING

A Flexible Solution for Your Starlink Mini Setup

RV and Van Stops

Create a temporary mounting setup on a suitable steel surface while parked.

Pickup and Work Vehicles

Use compatible flat steel panels or equipment surfaces when a removable installation is needed.

Off-Grid Worksites

Position your Starlink Mini on suitable metal equipment or structures where a compatible mounting surface is available.

Flexible Travel Setups

Move the mounting kit between compatible surfaces without drilling permanent holes.

Safety Note: This mount is intended for parked or temporary setups. Do not rely on magnetic attachment for high-speed exterior driving. The stated pull rating does not establish safe driving speed or resistance to wind loads, vibration, or sudden impacts.

7. UNDERSTAND THE 264 LB RATING

Holding Strength Depends on the Surface and Installation

The advertised 264 lb figure represents a maximum vertical pull rating under specified test conditions. It should not be interpreted as a guaranteed working load for every installation.

Actual holding strength may be lower depending on:

• Metal type and thickness

• Paint or surface coatings

• Surface flatness and contact area

• Dirt, water, oil, or other contaminants

• Vibration and cable tension

• Temperature and environmental conditions

Always test the mount before use. Keep the cable from pulling against the mount, and inspect the installation regularly.

Do not use the maximum pull rating as evidence that the mount is safe for high-speed vehicle travel.

8. COMPLETE YOUR SETUP

Recommended Accessories for Cleaner Cable Routing

16AWG Replacement DC Power Cable

Add cable length when your Starlink Mini is positioned farther from the power source.

12V/24V to 30V Car Charger

Power your Starlink Mini from a compatible vehicle power socket.

No-Drill Cable Routing Panel

Help organize cables in RV, van, or cabin setups without leaving a door or window open.

Accessories are sold separately unless explicitly included in the selected package.

9. IMPORTANT NOTES

• Designed for Starlink Mini mounting setups.

• Use only on suitable flat magnetic metal surfaces.

• Do not use on aluminum, fiberglass, glass, plastic, or other nonmagnetic surfaces.

• Clean and dry the surface before every installation.

• Confirm full contact between the magnetic base and the mounting surface.

• Test the holding strength manually before use.

• Do not slide the mount across painted surfaces; doing so may cause scratches.

• This product is intended for parked or temporary setups, not high-speed exterior vehicle mounting.

• Do not exceed the mount's verified working-load limits.

• Starlink Mini, power cables, and other accessories are not included unless explicitly stated.